4. Condition
If reflow, IMC layer occurs between the solder ball and substrate. IMC layer's composition changes depending on reflow time.
Temperatuer
255℃
Reflow time
1s, 1min, 5min, 10min, 20min
Experimental conditions
5. Analysis
IMC layer change was observed according to the reflow time.(Reflow time : 1s, 1min, 5min, 10min, 20min). Do refer to
Condition)
- 한 사상이 일어나기 위해서 없어서는 안 될 원인적 요건을 말하는 것으로, 즉 X가 Y의 필요조건이면 Y는 X없이는 일어나지 않는다.
(2) 충분조건(Sufficient Condition)
- 어떤 원인적 요건이 일어나기만 하면 항상 한 사상이 일어나는 경우, 즉 X가 일어나면 항상 Y가 발생할 때 X는 Y의 충분조건이다.
conditions which consist of RF power, substrate temperature and duration time fixed at 200W, 300 °Cand 20 minutes.
In following steps, MZO and GZO thin films were deposited on first-step prepared samples respectively. The samples are deposited in the conditions that consist of RF power, substrate temperature and duration time fixed at 150W,200 °Cand 15 minutes.
2.2. Characterization
The
2.본론
2-1. 현미경이란
현미경의 정의는 사람의 눈으로 관찰이 불가능한 미세한 물일이나 기타샘플을 광학 렌즈와 적당한 빛을 이용하여 자신이 원하는 크기로 확대시켜주는 것을 의미한다.
예전부터 눈으로 볼 수 있는 것보다 더 작은 것을 보고자 한 인류는 16세기에 이르러 확대경을 만들게 되었으
2.7 Shrinkage
- Theoretical value: (a=35, : Maximum Shrinkage Strain Ratio)
- The process of finding 'a'
1. Arranging excel data
2. Finding 'a' with using a grapher program
(Converting Excel data into graph shape)
(Standardization of graph through regression analysis)-회귀분석을 통한 그래프 평균화
(Finding 'a' with using shrinkage equation)
3. Finding 'a'